2020. 3. 3. 07:05ㆍ카테고리 없음
Hello, I'm trying to move my Palm Desktop over from old Vista-32 to new Windows 10 laptop. I have a Z22 and I'm using Desktop 4.2.I installed Desktop 4.2 from my original disk and followed the instructions in the post '64 Bit Windows7/8/8.1 USB drivers for Palm Desktop' and I made the program always run as administrator.Everything went as expected.
The Desktop seems to be running fine and when I did Hotsync it brought all my tasks, contacts, etc from the Z22 into the Desktop.I then changed some tasks in the Desktop and Hotsynced again. It whirred away and I got the usual message 'Hotsync complete' but none of the changes in the tasks appeared on the device. I then tried the other way round and that didn't sync either. Nor will the Calendar sync, yet it tells me Hotsync complete.
I've re-started and tried a different USB socket but no joy.Is this a problem with using version 4.2 (in which case I'll uninstall and try 6.2) or might it be something in my settings? Thanks for your help.
I tried but unfortunately it's not that.Under the Desktop Hotsync tab, I selected 'Custom' and it showed the action for Tasks etc. As 'synchronise'.
Aceeca 64 Bit Driver
Just as an experiment I changed it to 'Desktop overides handheld' but it made no difference when I did the Hotsync - both the desktop and device display ´synchronising Tasks, Calaendar, etc`, etc and it whirrs round and then says Hotsync complete. The Hotsync log on the device says `Tasks OK´, Calendar OK, etc.
So it thinks it has completed the synch but no data has moved in either direction.Is there something else I can try? OK, I'm back.I dug through all my Palm accessory drawer(s) and pulled out some of the funkiest Palm cables I had forgotten about! The one I'm using now is full-width of the HotSync port, and has an extra port to attach the charger separately!Using Palm Desktop 6.2.2, I had a similar experience - made new data on the Desktop, then performed a HotSync. All went well, no data transferred to the TX.Closed Palm Desktop on the PC, re-opened, did a HotSync, all was well! Had to do the same when I entered new data on the TX.
Would not show until I closed Palm Desktop, then restarted it!Still experimenting. See if closing/re-opening works on 4.x.WyreNut. I had an idea, which has partially solved the problem. In Windows 10 I right clicked on the Desktop icon and selected 'troubleshoot compatibility', then 'troubleshoot program', it asked me if the program worked OK on a previous version of Windows, so I said it did on Vista and then it applied Vista compatibility settings.Now Hotsync works both ways.However - it has deleted all my categories both on the desktop and the device and now just shows either Business, Personal or Unfiled. I don't know how or when this happened because it's the same on the Desktop on my old PC, so perhaps I've done something wrong to delete the categories and this problem has nothing to do with installing Desktop in Windows 10. Anyway, it isn't a huge problem to go through my tasks and add categories again.So if you think the problem with categotries is unrelated, I can perhaps mark the Hotsync problem as solved.
Hi Wyrenut.Thank you for your previous advice, which has been invaluable. I am about to switch from Windows 7 32-bit to Windows 10 64-bit. I am currently succesfully runing Desktop 4.1.4 with HotSynch 4.1.0 I failed to get Desktop 6.2 to work some time ago, but found the earlier version fine.Are you able to confirm that my set-up will work on Win10 64-bit? I would need to guarantee that I could transfer the data in my current Desktop. Overall I am very dependent on my Palm Desktop and Palm TX although I suppose I could reluctantly synchronise a working Desktop with my i-phone and kiss the TX goodbye.Many thanksGROUPIE.
Wrote:Hi Wyrenut.Thank you for your previous advice, which has been invaluable. I am about to switch from Windows 7 32-bit to Windows 10 64-bit. I am currently succesfully runing Desktop 4.1.4 with HotSynch 4.1.0 I failed to get Desktop 6.2 to work some time ago, but found the earlier version fine.Are you able to confirm that my set-up will work on Win10 64-bit? I would need to guarantee that I could transfer the data in my current Desktop. Overall I am very dependent on my Palm Desktop and Palm TX although I suppose I could reluctantly synchronise a working Desktop with my i-phone and kiss the TX goodbye.Many thanksGROUPIEI cannot confirm Palm Desktop 4.x will work correctly.
I have tried 6.2.2, and found it works with a minor HotSync glitch.Let us know what you find out! Be sure to make backups of all your Palm data. Use the File/Export method to easily Import all the info into 6.2.2 if you decide to use that version.WyreNut.
12 (4.27)Downloads:6Supported systems:Windows AllPrice:Free. (.Free Registration Required)I returned the cards. The Apple NICs perform very slightly better than the hawking units.The performance is exactly the same as the Hawking cards, but at 4 times the price. Not a very good bargain huh? That's how much both cards cost. I contacted Corky at Small-Tree and he said the 90mt is my best bet for using jumbo frames and copper gig-e on a powermac g4.
Palmone Zire 72 Software Download
He said that no one Danpex ADP1100 ever tried one in a sawtooth as far Danpex ADP1100 he could remember. Pretty frustrated.
Probably a problem with OS X. The AFP on volume selection crashes the finder. Not much to say other than it appears that since this has happened with two different gig-e cards it's either the G4 platform or OS X itself. Danpex ADP Networks Cards Downloads Free! Drivers. Games palm zire 72. Danpex drivers free download software for all devices.
NetZoom Device Library for Danpex. Games palm zire 72. Practical Gift Giving Ideas for You and Your Loved OneBoth Danpex ADP1100. Running OS X Pretty lousy performance, but it's all at MTU which sucks. The maximum MTU supported is A weak correlation but pretty much shows you that non-jumbo gig-e really ISN'T gig-e.Thankfully, the new MacPros support jumbo frame on board. Didn't test for deep sleep supportsorry. Most of the systems here won't sleep for various reasons USB, Danpex ADP1100 upgrades.
Danpex ADP1100 User ManualLater, Doug. I wrote to you Danpex ADP1100 over a year ago Aug 10, about my problems with an Intel Pro Gigabit Ethernet card. Fortunately, I was able to return the Intel card and talk the vendor into accepting it without charging me a restocking charge.
I picked it at a PC parts store so I could not get any info on how it would perform in a Mac. The card works fine, but I was hoping it would support deep sleep and was disappointed to discover it does not. When I put my G4 to sleep the fan still continues to run. OWC says explicitly that their FireWire card supports deep sleep.
Best regards, Steve' I can't say for sure but back in May shortly after tiger release several owners of FW Danpex ADP1100 reported the deep sleep problem was fixed. Lacie card, OWC card, etc. A lightning strike took out 2 of the 4 ports on my Linksys router and also destroyed its wireless capability. Although my PowerMac 1Ghz dual-processor Quicksilver running The surge traveled through the Cat-5 and fried the ethernet port on the Quicksilver.Based Danpex ADP1100 Roger C. Got the latest Loaded 'em.Now, it may have worked under Tiger based on Roger C. The Quicksilver couldn't even recognize the card present in slot Danpex ADP1100.
I tried different shots, also.Wound up returning it. It may just have been a bad card but the LED's lit up Loaded the drivers. Card works great, 'cept the Quicksilver won't deep-sleep. For me, I can't have Danpex ADP1100 card which inhibits the deep-sleep function of the computer.The folks I spoke to at Belkin about this were clueless beyond measure and according to the two Tech support people to whom I spoke they aren't even given any Macs to use as test computers. Maybe it's the Wake-On-Lan function of the card.
I even restarted the Quicksilver and disconnected the Cat-5 cable from Danpex ADP1100 Quicksilver to my router and I still couldn't make the Quicksilver deep-sleep. I'm not sure whether or not to try the NetGear one. NetZoom Device Library for DanpexI read that it is compatible with Tiger but has anyone tried it with Danpex ADP1100 Which Netgear card model? View and Download Danpex ADP user manual online.
PCI 10/TX Fast Ethernet Board. Mac OS X PCI Ethernet Card Compatibility reportsADP PCI Card pdf manual download. Official Danpex ADP Free Driver Download - exe. World's most popular Danpex ADP1100 download site.